08.30 – 10.00 am

Registration

10.00 – 10.30 am            

Opening Ceremony:

Opening CeremonyWelcome Speeches:

Eng. Osama Kamal

Conference Chairman

Prof. Dr. M. El-Rifai

Honorary Chairman Egyptian Society of Chemical Engineers 

Time

Keynote Speakers 

10.30 – 11.30 am

20 min

Keynote 1

Role of Egyptian General Petroleum Corporation

“EGPC” in economic development

Eng. Abed Ezz El Regal

Chief Executive Officer of EGPC

20 min

Keynote 2

Role of the Ministry of Military Productionin sustainable development in the water sector

Dr. Mohamed S. Al Gamal

Chairman Assistant of Science and Technology Center of

Excellence – Ministry of Military Production

20 min

Keynote 3

Fifty years of evolution in teaching Process Plant

Design Journey of Learning

Prof. Dr. Ahmed H. Gaber 

Professor of Chemical Engineering – Cairo University

11.30 am

– 12.10 pm

Coffee Break

Time

SESSION (1) – (12.10-01.50) Modern Technological Trends

Session Chairman: Prof. Dr. Mahmoud El-Rifai                              

Professor of Chemical Engineering – Cairo University

Moderator:              Prof. Dr. Reem El-Touny

Professor of Chemical Engineering – Cairo University

12.10-12.30

Carbon utilization & petrochemical integration:

Capturing value via residue to chemical projects

Mr. Hanh Tran, Axens

Axens, Rueil Malmaison, France

12.30-12.50

Modern refinery configuration for R&P integration

Eng. Mohamed Samy

Honeywell – UOP

12.50-01.10

Latest trends in Ammonia plants. 

Mr. Stefen Gebert  

CASALE

01.10-01.30

Separation of oil in water emulsions using integrated membrane technique

Dr. Radwa Mourad Taman

PhD. Chemical Engineering, Operations Dept.

Integrity Management Team, GUPCO – BP

01.30-01.50

Discussion & End Session

ime

SESSION 2) – (01.50-04.40) Challenges in Energy Field 

Session Chairman: Eng. Osama Kamal                         

Former Minister of Petroleum & Mineral Resources                   

Moderator:              Dr. Tamer M. Heakal

G.M. Planning and Project Follow-up, ECHEM

01.50-02.10

Challenges to East Med Gas

Eng. Amira El Mazni, Independent Gas Expert

02.10-02.30

The age of renewable & hydrogen; “the present and future fuel”

Dr. Mohamed El Sawy, Nour Consulting

02.30-02.50

Refining system with ongoing projects – risks and mitigations with a proposed strategic plan over 2020

– 2050

Eng. Farouk Kandil, Nour ConsultingPresented by:

Eng. Azza Nour EL Din, Nour Consulting

02.50-03.10

Integrated refining system optimization to satisfy local market

Eng. Sherief El Sayed, Enppi

10 min

Rest 

03.20-03.40

Simple optimized module for flared gases recovery

 Eng. Hassan Taman, Enppi

03.40-04.00

The energy market restructuring to support the opportunities for the potential collaboration between renewable energy and natural gas Eng. Nader M. Serry, Enppi

04.00-04.20

Gas early production facility (EPF)

Eng. Mohamad Kamal Gaber, Petrojet 

04.20-04.40

Discussion & End Session

04.40-05.30

LUNCH

09.00-09.30

 Success Stories

 Artificial Intelligence

 Prof. Dr. Ibrahim Fathy Moawad

Professor of Artificial Intelligence, Ain Shams University  Director of Electronic and Knowledge Services Center, Secretary of

Computer Science & Informatics Sector Committee, Supreme Council of Universities, Egypt

Time

SESSION (3) – (09.30-11.10)

Modern Trends in Chemical Engineering

Session Chairman: Prof. Dr. Fatma Ashour                                      

Professor of Chemical Engineering – Cairo UniversityDirector of Cairo University Center for Hazard Mitigation and Environmental Studies and Research

Moderator:             Prof. Dr. Mamdouh Gadalla

Head of Chemical Engineering Dept – Port  Said  University

09.30-09.50

Multi-effect vacuum membrane distillation pilot unit

Elham El Zanati, Maaly Khedr,

 Eman Farag, Esraa Taha,

National Research CenterPresented by:

Eng. Eman Farag Helemy

09.50-10.10

Study the effect of insulation type on minimizing emissions and maximizing heat recovery through simultaneous integration of HEN design

Eman Gabr, Soad M. Mohamed

Egyptian Petroleum Research Institute ‘EPRI’ Presented by:

Eng. Eman Gabr

10.10-10.30

Titanium foam for dental implant applications

Eng. Marwa M. G. El-Saies, Higher Institute of

 Engineering and Technology ’HIET’

10.30-10.50

Energy saving after replacement of Ammonia converter, Abu Qir-3

Eng. Mohamed Eltohfa

Abu Qir Fertilizers Company (AQFC)

10.50-11.10

Discussion & End Session

11.10-12.00

Coffee Break

Time

SESSION (4) – (12.00-02.00) Bio – Technologies and Bio – Refineries

Session Chairman: Prof. Dr. Seham A El-Temtamy

Emeritus Professor at the Process Development Department, Egyptian

Petroleum Research Institute‘EPRI’

Moderator:             Prof. Dr. Laila Farahat

Professor of Environmental Biotechnology, Process Development

Department, Egyptian Petroleum Research Institute ‘EPRI’

12.00-12.20

Development of large scale esterification prototype

Prof. Dr. Elham El Zanati National Research Center ‘NRC’ Presented by:

Eng.Esraa Taha Aboud, NRC

12.20-12.40

Effect of different stress factors on lipid content of selected micro algal strains for biodiesel production enhancement

Eman A. Mahmoud, Laila A. Farahat, Zeinab K.

Abdel Aziz, Nesreen A. Fatthallah, Rawhey A. Salah El Din, Egyptian Petroleum Research Institute ‘EPRI’ Presented by:

Eng.Eman A. Mahmoud

12.40-01.00

Application of novel hyperbranched Poly(Amide-Ester) polymers as anti-microbial, anti-bio films and anti-aerobic corrosion agents

A. Labena, Khalid I. Kabel and Mohamed Keshawy

Egyptian Petroleum Research Institute ‘EPRI’

Presented by: Dr. A. Labena

01.00-01.20

Sustainable development (SD) through the effective production and use of bio-fuels (BFs) and integrated biorefineries (IBRs)

Prof. Dr. Said S.E.H. Elnashaie, UBC, Canada Presented by:

Ass. Prof.Ahmed H. El Ahwany, CED, Cairo University

01.20-01.40

 Pyrolysis of Jatropha as energy potential biofuel in Egypt

Prof. Dr. Ibrahim Ashour, Chemical Engineering Dept., Minia University.

01.40-02.00

Discussion & End Session

Time

SESSION (5) – (02.00-03.10)

Smart and Economic Manufacturing / Refining  

Session Chairman: Gen. Dr. Eng. Moustafa K. Hadhoud

Former Behira Governor

Moderator:   Prof. Dr. Mohamed Amin E. Sadeq

Professor of Chemical Engineering – British University

02.00-02.20

Digital Twin with Intelligent & Integrated

Manufacturing Technologies & Digitized Solutions Dr. Hamdy Noureldin, Nour Consulting. 

Presented by:

Eng. A. M. Abdel Monsef, ERC

02.20-02.40

Value Methodology Application in Industry and

Investment Optimization

Eng. Ahmed Fahim, Enppi